News

Check category



Location:

Lock maintenance tips

Categories:Buying Guide
Time of issue:2022-05-16 17:02
Views:

(Summary description)Don't get wet in the lock. Flush water, because there are small springs inside, which will rust and fail and are inflexible;

Lock maintenance tips

(Summary description)Don't get wet in the lock. Flush water, because there are small springs inside, which will rust and fail and are inflexible;

Categories:Buying Guide
Author:
Origin:
Time of issue:2022-05-16 17:02
Views:

Information

　　1. Don't get wet in the lock. Flush water, because there are small springs inside, which will rust and fail and are inflexible;

　　2. Don't put a bunch of locomotive keys together. When the locomotive is running, the shaking of the key and the weight will wear out the lock core, and the key will slip out after a long time;

　　3. When the key is not easy to insert or pull out, slide down the key teeth with a pencil, insert the lock cylinder and grind it several times;

　　4. The inside of the lock cylinder must not be refueled. After a long time, the dust will enter the lock cylinder, which will affect the ejection of the marbles, resulting in the inability to open the door. At that time, it will not work to lubricate with lead immediately;

　　5. When the door lock is not easy to open and close, spray some lubricating oil on the oblique tongue;

　　6. Automatic locks (three sections, four sections, and five sections) should have some micro-gap and not be too tight.

　　7. The door seam should not be too large, and it is easy to be opened and shaken;

　　8. The anti-theft door has a lattice type, and the iron wire is used to prevent the quilt from being inserted into the oblique lock handle of the automatic lock to open the door;

　　9. Don't use the key to open the door directly, turn the key to open the door lock, pull the key directly to open the door before the lock core returns to the original position, the lock will protest you and say goodbye soon.